DSE4200 Microwave based Moisture Meter for Balers

The DSE4200 microwave based Moisture Meter

For more than 15 years DSE Test Solutions A/S has been the leading supplier of moisture meters for the
bio energy sector – based on the same DSE microwave technology that today is used as the preferred
technology within the industry. DSE4200 Moisture Meter is designed for installation on balers, in order to
improve the efficiency during baling. The microwave technology offers high accuracy, while the non-contact
system assures long-term reliable measurement results, as it is not sensitive to dirt and pollution. During
baling the readings are monitored on the tractor cabin display, which gives the operator full control with
the quality of the baled biomass, while minimizing the losses and improving the efficiency

POA

Description

Benefits
Save time, improve quality and get full documentation:

The microwave technology allows the DSE4200 to make measurements with the highest
accuracy in the market for baler moisture sensors.
The non contact system assures reliable measurements not being sensitive to dirt or pollution.
One measurement is completed for every 8 cm of the bale and displayed continuously while baling.
Up to 13.000 cm? of baled biomass is measured at each measurement.
No need to stop baling in order to measure bales manually.
Full quality control — keep baling until the dew falls.
Alarm function on display for identification of wet spots.
Average moisture value of the field is being displayed as well as the continuously moisture values of
the bales.
The moisture values can be stored on a USB memory stick for documentation.
Moisture can be measured on all traditional straw types, hay types and corn stover.
The DSE4200 is easy to install and suitable for all brands and sizes of square balers.

The DSE4200 microwave based Moisture Meter kit includes: 1 transmitter unit, 1 receiver unit, 1 display,
1 proximity switch, cables and mounting brackets, USB memory stick, user manual and installation guide.

Moisture Meter Technical data Display Technical data
DSE4200 has the following specifications: The display has the following specifications:
Dimensions (W x H x D): 150 x 80 x 80 mm Display: a-Si TFT, LCD 3,5”
Measuring range: 6% – 35% relative moisture Dimensions (W x Hx D): 95 x 95 x 46 mm
Measuring accuracy: +/- 1% up to 30% relative Resolution: 320 (H) x 240 (V) QVGA
moisture, hereafter +/- 2%. * Viewing Angle: 130/110 degrees from 6 O’clock.
Measurement frequency: 2.4 GHz Number of colors: 64K
Communication: CAN J1939 Brightness: 750 NIT (cd/m?)
Speed signal: Via CAN or digital input Power Requirements: 10V to 32V DC
Connection: Deutsch DT13-08 Connection: (2) 12 Pin Deutsch DT04-12PA
Ambient temperature: -10°C to +60°C Ambient temperature: -20° to + 70° C
Storage temperature: -25°C to +80°C Storage temperature: -30° to + 80° C
Ingress Protection: IP 65 Degree of protection: IP 67
Power: 10-28 DC Case material: ABS
CE approval: Case color: Black
EN/ISO 14982:2009
aN 55011:2009
* calibrated after bale width on 1,2 m. Dry weight density
approx. 135 – 160 kg/m3.

DSE4200 Microwave based Moisture Meter for Balers

DSE4200 Microwave based Moisture Meter for Balers

POA

Description

Related products